Stripping & Crimpingmachine PP3+

The pneumatic PP3 + is a highly reliable stripping and crimping machine for processing taped longitudinal and cross contacts in the cross-sectional area from 0.03mm² to 1.5mm² (AWG 32-16).

The machine is based on the principle of a toggle press. The upper and lower tool holders move in opposite directions, which guarantees the highest level of processing quality.

The start cycle is triggered by a sensor. The clamping jaws hold the strand, the stripping and crimping process starts automatically.

After crimping, the jaws open automatically and the crimped strand is ejected.

Technical data

> Cross section 0,03-1,5mm² (AWG 32-16)
> Stripping length max. 12mm (0,48″)
> Stripping length of cross tool min. 15mm (0,59″)(contact dependent)
> Stripping length of longitudinal tool min. 11mm (0,43″) (contact dependent)
> Crimp height adjustment 0,04 mm (optional 0,02mm)
> Max. Roll width 190mm (7.4″)
> Max. Roll diameter 750mm (29.5″) / /Standard)
> cycle time ca. 3.000 cycles/h
> pressure 4-6 bar
> Air consumption per cycle 1,45 NL (5 bar)
> noise level 75 db
> options * Crimp force monitoring
* different types of jaws:
Plasma surface for short stripping length
* Contact oilers
> dimensions (LxWxH) 250 x220 x 450mm (9.9 x 8.7 x 17.7″)
> weight 16 Kg (32.2 lbs)
> CE-compatibility The PP3 + fully complies with the CE machine guidelines (mechanical safety)
> important note We recommend having your cable sampled by us in case of doubt
Close Menu